User Manual

78Q8430 Driver Manual for ST5100/OS-20 with NexGen TCP/IP Stack UM_8430_005
24 Rev. 1.0
STEP 5: Make the new code for a complete IPSTB image (create ref_ipstb.lku).
▪ Change to directory C:\ipstba5\src\ref_ipstb
▪ gmake clean
▪ gmake
5.3 Run the STi5100 IPSTB Example
Use the following procedure to execute the IPSTB ref_ipstb.lku application to request an MPEG2 movie
from the server:
STEP 1: From the Windows Start menu, select and execute st20dev (the ST20R2.0.5 tool set).
STEP 2: Select ‘File’ → ‘Open Workspace’ → ‘C:\ipstba5\ref_ipstb.stw’.
STEP 3: Make sure the ST Microconnect and STi5100 box are powered-up.
STEP 4: Select ‘Build’ → ‘Start Debug’ → ‘Go’.
STEP 5: Select ‘Debug’ → ‘Go’.
A second DOS window will appear displaying the Testtool prompt:
Testtool>
STEP 6: Request an MPEG2 movie from the server by entering the following command:
PlayManager_Play “rtsp://192.168.1.110:554/song?vidpid=34&audpid=33&Bitrate=1400"
STEP 7: Stop the movie using the following command:
PlayManager_Stop
The text file C:\ipstba5\Play_Commands.txt contains ready made commands with correct parameters to
play various MPEG2 streams. Refer to the ST IPSTB user guide for more information on the
PlayManager and IPSTB software.