Datasheet

73S8023C Data Sheet DS_8023C_019
18 Rev. 1.5
12 Electrical Specification
12.1 Absolute Maximum Ratings
Operation outside these rating limits may cause permanent damage to the device.
Parameter Rating
Supply Voltage V -0.5 to 4.0 VDC
DD
Input Voltage for Digital Inputs -0.3 to (V
DD
+0.5) VDC
Storage Temperature -60 °C to 150 °C
Pin Voltage (except LIN and card interface) -0.3 to (V
DD
+0.5) VDC
Pin Voltage (LIN) -0.3 to 6.0 VDC
Pin Voltage (card interface) -0.3 to (V
CC
+ 0.5) VDC
ESD Tolerance – Card interface pins +/- 6 kV
ESD Tolerance – Other pins +/- 2 kV
ESD testing on Card pins uses the HBM condition, 3 pulses, each polarity referenced to ground.
The smart card pins are protected against shorting between any combination of smart card pins.
12.2 Recommended Operating Conditions
Parameter Rating
Supply Voltage V
DD
2.7 to 3.6 VDC
Ambient Operating Temperature -40 °C to +85 °C
Input Voltage for Digital Inputs 0 V to V
DD
+ 0.3 V
12.3 Package Thermal Parameters
Package Rating
32QFN
47 °C / W (with bottom pad soldered)
32QFN
78 °C / W (without bottom pad soldered)