Datasheet

73S1215F Data Sheet DS_1215F_003
112 Rev. 1.4
3 Electrical Specification
3.1 Absolute Maximum Ratings
Operation outside these rating limits may cause permanent damage to the device. The smart card
interface pins are protected against short circuits to V
CC
, ground, and each other.
Parameter Rating
DC Supply voltage, V
DD
-0.5 to 4.0 VDC
Supply Voltage V
PC
-0.5 to 6.5 VDC
Storage Temperature
-60 to 150
°C
Pin Voltage (except card interface) -0.3 to (V
DD
+0.5) VDC
Pin Voltage (card interface) -0.3 to (V
CC
+0.5) VDC
ESD tolerance (except card interface) +/- 2KV
ESD tolerance (card interface) +/- 6KV
Pin Current
± 200 mA
Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
Note: Smart Card pins are protected against shorts between any combinations of Smart Card pins.
3.2 Recommended Operating Conditions
Unless otherwise noted all specifications are valid over these temperatures and supply voltage ranges:
Parameter Rating
DC Voltage Supply VDD 2.7 to 3.6 VDC
DC Voltage Supply VDD for USB operation 3.0 to 3.6 VDC
Supply Voltage V
PC
for Class A-B-C Reader 4.75 to 6.0 VDC
Ambient Operating Temperature (Ta)
-40
°C to +85°C