Datasheet

73S1215F Data Sheet DS_1215F_003
10 Rev. 1.4
Pin Name
Pin (68 Qfn) Pin (44 Qfn) Type Equivalent Circuit*
Description
ANA_IN 15 10 AI Figure 38 Analog input pin. This signal goes to a programmable
comparator and is used to sense the value of an
external voltage.
SEC 67 2 I Figure 37 Input pin for use in programming security fuse. It
should be connected to ground when not in use.
TEST 54 33 DI Figure 37 Test pin, should be connected to ground.
VDD 28
42
65
18
27
44
I
General positive power supply pins. All digital IO is
referred to this supply voltage. There is an on-chip
regulator that uses VDD to provide power for internal
circuits (VPD). A 0.1μF capacitor is recommended at
each VDD pin.
N/C 46 29 0 No connect.
GND 9
25
44
7
15
GND General ground supply pins for all IO and logic circuits.
RESET 66 1 I Figure 33 Reset input, positive assertion. Resets logic and
registers to default condition.
* See the figures in the Equivalent Circuits section.