User Manual

UG_2901CE_027 73M29 01CE AT Command User Guide
Rev. 2.0 41
4.4.78 S77 – Pre-Dial Call Progress Precise Detect Level
(Default = 30)
S77 determines at what minimum level precise call progress tones are detected before dialing. Range is 1
to 96. (a larger value corresponds to a lower sig nal level). The default value translates into –45dBm. The
dBm level depends on the DAA used. The ran ge is –25 to –45dBm. Refer to table under S78.
4.4.79 S78 – Post-Dial Call Progress Precise Detect Level
(Default = 30)
S78 determines at what minimum level pre cise call p rogress tones are detected after dialing. Range is 1
to 96. (a larger value corresponds to a lower sig nal level). The default value translates into –45dBm. The
dBm level depends on the DAA used. The ran ge is –25 to –45dBm.
4.4.80 S79 – FSK Originate Carrier Detect Level
(Default = 35)
S79 determines at what minimum level carrier is detected for originating FSK. Range is 1 to 96. (a larger
value corresponds to a lower signal level ). The range is –25 to –45dBm.
4.4.81 S80 – FSK Answer Carrier Detect Level
(Default = 35)
S80 determines at what minimum level carrier is detected for answering FSK. Range is 1 to 96. (a larger
value corresponds to a lower signal level ). The range is –25 to –45dBm.
4.4.82 S81 – DPSK Originate Carrier Detect Level
(Default = 40)
S81 determines at what minimum level carrier is detected for originating PSK. Range is 1 to 96. (a larger
value corresponds to a lower signal level ). The range is –25 to –45dBm.
4.4.83 S82 – DPSK Answer Carrier Detect Level
(Default = 35)
S82 determines at what minimum level carrier is detected for answering PSK. Range is 1 to 96. (a larger
value corresponds to a lower signal level ). The range is –25 to –45dBm.
4.4.84 S83 – QAM Originate Carrier Detect Level
(Default = 40)
S83 determines at what minimum level carrier is detected for originating QAM. Range is 1 to 96. (a
larger value corresponds to a lower signal level). The range is –25 to –45dBm.
4.4.85 S84 – QAM Answer Carrier Detect Level
(Default = 35)
S84 determines at what minimum level carrier is detected for answering QAM. Range is 1 to 96. (a
larger value corresponds to a lower signal level). The range is –25 to –45dBm.