Datasheet

71M6511/71M6511H
Single-Phase Energy Meter IC
DATA SHEET
NOVEMBER 2010
Page: 85 of 98 © 2005–2010 Teridian Semiconductor Corporation V2.7
A Maxim Integrated Products Brand
SPECIFICATIONS
Electrical Specifications
ABSOLUTE MAXIMUM RATINGS
Supplies and Ground Pins:
V3P3D, V3P3A
−0.5V to 4.6V
| V3P3D - V3P3A |
0V to 0.5V
VLCD -0.5V to 7V
VBAT -0.5V to 4.6V
GNDD -0.5V to +0.5V
Analog Output Pins:
VREF, VBIAS
-1mA to 1mA,
-0.5 to V3P3A+0.5V
V2P5
-1mA to 1mA,
-0.5V to 3.0V
Analog Input Pins:
IA, VA, IB -0.5V to V3P3A+0.5V
XIN, XOUT -0.5V to 3.0V
RX -0.5V to 3.6V
OPT_RX
-1mA to 1mA
-0.5 to V3P3A+0.5V
Digital Input Pins:
DIO4-11, DIO14-17, E_RXTX, E_RST -0.5 to 6V
TEST, RESETZ -0.5 to V3P3D+0.5V
All Other Pins:
Input pins
-5mA to 5mA
-0.5V to V3P3D+0.5V
Output pins
-30mA to 30mA
-0.5 to V3P3D+0.5V
Temperature:
Operating junction temperature (peak, 100ms) 140 °C
Operating junction temperature (continuous) 125 °C
Storage temperature
−45 °C to 165 °C
Solder temperature – 10 second duration 250 °C
ESD Stress:
Pins IA, VA, IB, RX, TX, E_RST, E_TCLK, E_RXTX 6kV
All other pins 2kV
Stresses beyond Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and functional
operation at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability. All voltages are with respect to GNDA.