User`s manual

Maxiflex T2 CPU User Manual 2 -© Omniflex

UMM124XBR04.pdf

DATE REVISION COMMENTS

May 2002 1 Initial Issue

June 2002 2 DIT Table updated, and corrections made

March 2004 3 Error on page 50 - Bit 12 used to set subscription block

Nov 2009 4 Reference to M1242 T2E CPU removed

SOFTWARE COPY AVAILABLE

This manual is available in printed form or in Adobe Acrobat pdf format.

The pdf file is named UMM124XAR04.pdf

1. The Copyright of this document and the associated drawings, is the property of Omniflex and

is issued on condition that it is not copied, reprinted or reproduced or transmitted in any form

or by any means, electronically, photocopying, mechanical or otherwise, nor its contents

disclosed, either wholly or in part, without the consent in writing of, or in accordance with the

conditions of a contract with Omniflex.

2. The publication of information in the document does not imply freedom from patent or other

protective rights of Omniflex or others.

3. Although every intention is made to ensure that performance figures and data are accurate the

company reserves the right to alter without notice any product or specification. Performance

figures and data must therefore be specifically confirmed by the company before they become

applicable to any tender, order or contract.

4. In the case of electrical components, enough data is included in the drawings to allow

maintenance of the equipment. However, if component availability or substitution information

is required please consult the factory for assistance, as it is impossible to include data on

every component in this document.

5. This product is sold without liability for consequential loss of any description.