User Manual

CHAPTER 2
IDLMAX CONFIGURATIONS
Product User Guide 13
Customising the iDLMax
Settings
It may be required at times to change the default setting of the iDLMax according to personal preferences. The settings can be changed from the
control panel. To access the control panel, from the task bar select Start>Setting>Control Panel.
Date & Time Settings
In Date & Time Setting, the year, month, date, time and time zone can be changed.
To change the Date & Time settings select Date/Time from the control panel.
Figure 2-4: DATE/TIME SCREEN
o To change the month, tap on the month to open a list of months and select the desired month.
o To change the year, tap on the month to activate a numeric dial. Select the up arrow to increase the value or the down arrow
to decrease the value. A new year value can be entered using the numeric keys on the iDLMax.
o The months (and years) can be scrolled by tapping the arrow buttons on either side of the displayed month and year.
o To change the time, select the hour, minute, second or AM/PM field and select the up arrow to increase the value or the down
arrow to decrease the value. New values can be entered using the numeric keypad on the iDLMax.
o The correct time zone can be selected form the pull-down list.
o Select Apply to save the changes made and/or select OK to exit the Date/Time settings
Backlight
The backlight timeout can be adjusted to reduce power usage or for convenience. The backlight setting can be adjusted by selecting Display from
the control panel and then by selecting the Backlight tab.
Figure 2-5: BACKLIGHT SETTING SCREEN
Modify the backlight pull-down list settings to suit personal preferences.
Select OK to exit the Display settings or press the <ENTER> key on the keyboard.
A Backlight typically consumes much power. It is therefore recommended to minimize the backlight turn-off time when using
battery power.