User Manual

CHAPTER 1
GETTING TO KNOW YOUR IDLMAX
Product User Guide 6
Resetting off the iDLMax
To reset the iDLMax, hold down the <POWER> key ( ) for approximately 4-5 seconds (as shown in figure 1-2). Select the “Power down” option
from the menu as shown in figure 1-3. The iDLMax will create a restore point to save all registry and related installed information before shutting the
unit down.
When the device is started from a complete shutdown state, the boot-up menu provides various options allowing for the device to be configured in
different start up ways (for example restoring it to its default factory settings). Contact your product/service provider for more detail on the
management of the boot-up sequence and options (for example when it is desired to clear the device and restore it to its default factory settings).
FIGURE 1-2 FIGURE 1-3
The device can also be reset by pressing the <POWER> key ( ) and holding it in for approximately 10 seconds.
In case of a serious error no response using the <POWER> key (
), a “hard reset” can be done by removing the main removable battery from
the iDLMax, and keep it out for 10-15 Minutes to allow the internal backup battery to drain completely. Upon replacing the removable battery now,
the iDLMax will start up afresh. Use the boot-up menu to apply start-up changes if required.