User Manual

U S I N G T H E I D L 3 0 0
Product User Guide
35
WiFi
Connecting to an 802.11b/g WiFi wireless Network
The iDL300 is fitted with an 802.11b/g wireless network module. By default, the 802.11b modem is disabled to preserve power. To enable the card,
tap the WiFi option on the Connectivity icon. The card will then be switched on and the Connectivity icon will turn to yellow.
The Wireless Properties window will open after the WiFi is turned on (if this window is not opened by default, open Wireless Properties by tapping
the Network icon in the system tray). To connect to a network select Wireless Information tab and wait a few seconds for available networks to be
scanned. A list of available wireless networks will be displayed. Select the desired network and then tap connect.
Select OK to exit the Wireless Properties window.
Network Icon