User Manual

P R E F A C E
Product User Guide
7
Safety and precautions for handling the iDL300 device
These precautions will assist in prevention of damage or personal injury and will ensure that optimal benefit is gained from using the iDL300. MaxID
Corp. cannot be held responsible in any way for any damages or loss resulting from the use of the iDL300.
The iDL300 incorporates a wireless WAN modem. This modem transmits and receives radio frequency energy while switched on and users and
operators need to take note of various safety precautions and guidelines in this regard.
THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT OR SYSTEMS, AIR TRAFFIC CONTROL
EQUIPMENT OR SYSTEMS, OR AIRCRAFT COCKPIT EQUIPMENT OR SYSTEMS. MaxID WILL NOT BE RESPONSIBLE FOR ANY LIABILITY
RESULTING FROM THE USE OF THIS PRODUCT ARISING OUT OF THE FOREGOING USES.
Before storing the device away, be sure to wipe off any moisture.
Do not disassemble this product and do not allow foreign matter to enter inside the product:
Electric shock may occur when pins or areas of the circuit boards are touched, or damage to various extends may result.
Unplug the AC plug and remove the battery pack if malfunction to the iDL300 occurs:
When serious product damage, foreign objects inside the product, smoke emitted, unusual smell emitted or product becomes unusually hot,
immediately turn the power off, unplug the AC plug and remove the battery. Continuing to use the product in such conditions may result in fire or
electric shock.
When using the AC cord, insert the AC plug completely into the AC outlet:
If not inserted completely, fire due to overheating or electric shock may result
Do not use a damaged plug or loose AC outlet.
Do not use the AC plug if your hands are wet: Electric shock may result.
Do not connect the AC adaptor to a Power Source other than the specified or standard defined AC outlet:
Doing so could damage the device or cause fire due to overheating.
Do not damage the AC adaptor, AC cord or AC plug in any way:
Damaged cord may result in fire, short circuit, or electrical shock. Do not place the cord near hot tools, twist or pull it forcefully, place heavy
objects on it, bundle it tight together, or modify the cord.
Clean dust and other debris of the AC plug regularly:
Accumulated dust or debris along with humidity may cause a defect to insulation, which may result in fire or electric shock.
Unplug the AC plug holding onto the plug itself:
Pulling on the cord may damage the cord, resulting in fire or electric shock.
Use only the correctly supplied AC cord and plug.
Use only the specified 12V universal AC adaptor with the iDL300 product:
Do not use the AC adaptor if it was exposed to strong impact:
Strong impact may damage the AC adaptor which might result in short circuit, electric shock, or fire if used.
Do not expose the iDL300 to excessive high temperatures or leave it in high temperature environments for a long period of time:
Excessively exposing the product near fire or direct sunlight for extended periods may damage the product and cause trouble with internal parts.
Using a damaged device may result in fire or electric shock.
Close the connector and card reader covers tightly when using this product in wet, moisture, steam, dust, oily vapour, etc. conditions:
If such matter enters the device, it may cause fire or electric shock. If it occurred, turn the device power off, unplug the AC, remove the battery
and contact your technical support office.
Do not operate the iDL300 WAN modem or any applications using it in the presence of flammable gases or fumes:
Switch of the WAN (cellular) communication modules when you are near fuel depots, petrol stations, chemical plants or any area where blasting
operations are in progress.
Keep SD memory cards and SIM cards away from infants and small children:
Accidental swallowing may result in bodily injury.
Use the supplied stylus on the touch sensitive screen: