Operation Manual

Location for installing outdoor unit
1. Install it at a place where it is convenient for installation and
well ventilated.
2. Keep the required distance away from the wall as reqiured on
the previous page when carrying on installation.
3. Pipe length and drop height should comply with the
scope required below.
4. When operating at a special place, for example, a place
of greasy dirt, vulcanization gas or high-salty seashore,
make sure to adopt an effective isolation measure.
5. Avoid installing it on the roadside where there is a risk
of muddy water.
6. Install it where your neighbors would not be annoyed by
operating noise or discharged hot air.
7. Install it on a fixed shelf that is not subject to increasing noise.
8. Install it at a place without blockage for air outlet.
Outdoor unit
Indoor
unit
elbow to
prevent water
from entering room
M
ax
dro
p
h
e
i
ght
L
15m
20m
25m
25m
9m
10m
10m
7.5m
5
5
5
OUTDOOR UNIT INSTALLATION
Please install the air conditioner
according to international rules.
Above figure is only a simple presentation of the unit,
it may not match the external appearance of the unit
you purchased.
Over
100mm
Over 1500mm
Over 200mm
Over 500mm
Over 100mm
Max pipe length
Max drop height L
Max. bending No.
5
Model
18
Select installation location considering piping and wiring connection after the Indoor Unit has
been hanged. Then decide the piping wiring leading direction.
Be sure to lead the refrigerant pipes, drain pipes and connection wires out to its connection
location before hanging the unit if the opening on the ceiling has been decided.
Confirm sizes of the indoor unit and ceiling opening with the attached installation paper
pattern. (Please fix the paper pattern below the body with M5X16 screws (4).
INDOOR UNIT INSTALLATION
11
INSTALLATION DIMENSION
18000Btu/h
SHAPE OF INDOOR UINT
a. hook and ceilingdistance between
b.height of panel ceiling sponge
c.distance between hook and indoor unit top
d.distance between ceiling and indoor unit top
e.height of indoor unit;
A.dimension of panel
Please select the space to install indoor uint according to the dimension show
above,then install correctly,and have enough space for maintenance.
36000Btu/h
42000Btu/h
48000Btu/h
INSTALLATION DIMENSION
B.dimension of ceiling cut-out
C.dimension of indoor uint.