AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. CR155-RG57A4(A6) 16117000A11163 Thank you very much for purchasing our air conditioner. Please read this owner's manual carefully before using your air conditioner.
Remote Controller Specifications CONTENTS Model RG57A4/BGEF,RG57A6/BGEF Rated Voltage 3.0V(Dry batteries R03/LR03×2) Remote controller Specifications................................................... 2 Signal Receiving Range 8m Operation buttons .................. ......................................................... 3 Environment 。 。 -5 C~ 60 C Indicators on LCD .......................................................................... 6 How to use the buttons ...........................
Operation of buttons 1 2 ON/OFF Button This button turns the air conditioner ON and OFF. Operation of buttons COOL DRY HEAT FAN 9 NOTE：Please do not select HEAT mode if the machine you purchased is cooling only type. Heat mode is not supported by the cooling only appliance. 1 2 ON/OFF SILENCE FP 9 MODE TIMER ON 10 3 NOTE: You can not switch the fan speed in AUTO or DRY mode.
Operation of buttons Indicators on LCD 12 Swing Button(applicable to RG57A4/BGEF) Used to stop or start vertical louver movement and set the desired left/right air flow direction. The vertical louver changes 6 degree in angle for each press. And the temperature display area of indoor unit displays for one second. If keep pushing more than 2 seconds, the vertical louver swing feature is activated.
How to use the buttons How to use the buttons Dehumidifying operation Auto operation 2 3 ON/OFF SILENCE FP 1 MODE TIMER ON NOTE 1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller. 2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled. 3.
Timer operation Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit. To set the Auto-on time. ON/OFF SILENCE FP MODE TIMER ON TEMP FAN TIMER OFF SLEEP FRESH TURBO SELF CLEAN LED FOLLOW ME 1 2 1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-on time to START the operation. 2.
TIMER ON → TIMER OFF (Off → Start → Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house. TIMER OFF (Auto-off Operation) The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. Stop On Set 10 hours later Example: To stop the air conditioner in 10 hours. 1.
Handling the remote controller Location of the remote controller. Use the remote controller within a distance of 8 meters from the appliance, pointing it towards the receiver. Reception is confirmed by a beep. 8m CAUTIONS MOD E SWI NG SHO RTC TEM DIR UT P ECT FAN SPE ED TIM ON ER SLE FRE EP SH TIM OFFER SEL TUR F CLE BO AN FOL LED LOW ME RES ET LOC K The air conditioner will not operate if curtains, doors or other materials block the signals from the remote controller to the indoor unit.
