Full Product Manual

92
device settings such as sound and display, as well as system security settings,
and check the associated information about the Android system, etc.
 To enable the App Switcher function
1. Tap the Settings application on the MaxiCheck Job Menu.
2. Tap the System settings option on the left column.
3. Tap the App Switcher option on the left column.
4. Mark the checkbox beside “Always show the App Switcher” on the
right side of the screen, then the App Switcher icon shows.
Short pressing the App Switcher icon opens a control panel:
 Tapping a specific app shortcut button enables you to switch directly to
the selected application screen.
 Long pressing a specific app shortcut button displays the app menu, on
which you can select and change the app shortcut.
 Pressing and dragging the App Switcher icon around allows you to
change the icon position alongside the edge of the screen.
You may refer to Android documentation for additional information about
Android system settings.
Firmware
This option allows you to update the firmware of the scan tool. Connect the
scan tablet with the vehicle through DLC or use the mini USB cable for power
supply. Follow the on-screen instructions to complete the operation. Internet
connection is necessary for this operation.