Full Product Manual

3. Tap the service you want in the SAS function list, the list may vary for

different vehicles being tested.

Steering Angle Sensor Calibration

This function allows users to perform steering angle sensor calibration and

clear records. The function options vary with the vehicles being tested.

1) Tap Steering Angle Sensor Calibration from the SAS function menu

to enter the function screen.

2) Follow the on-screen instructions to set the ignition on/off as guided. The

vehicle battery voltage signal should be in the range 12.5 – 13.5 volts to

proceed this service, otherwise the scan tablet will display a warning

message.

3) Make sure the steering wheel is in the central position and the front

wheels are in the straight position. Then tap OK to proceed.

Figure 5-18 Sample SAS Function Menu