Full Product Manual

IMPORTANT

Always reset the engine oil life to 100% after every oil change.

NOTE

All required work must be carried out before the service indicators are reset.

Failure to do so may result in incorrect service values and cause DTCs to be

stored by the relevant control module.

NOTE

For some vehicles, the scan tool can perform added functionality to reset

additional service lights (maintenance cycle, service interval). Taking BMW

as an example, its service reset function includes engine oil, spark plugs,

front/rear brakes, coolant, particle filter, brake fluid, micro filter, vehicle

inspection, exhaust emission inspection and vehicle check.

All software screens shown in this manual are examples, actual test screens

may vary for each vehicle being tested. Observe the menu titles and on-

screen instructions to make correct option selections.

 To perform oil reset functions

1. Tap the Service application button from the MaxiCheck Job Menu.

2. Tap Oil Reset button and wait for the vehicle manufacturer screen.

You can tap VIN Scan or the vehicle make to acquire vehicle VIN

information and tap Yes to confirm. See Vehicle Identification on

page 16 for detail.

3. Tap the function you want in the Oil Reset function list, the list may

vary for different vehicles being tested.