Full Product Manual

35
NOTE
This mode supports Graph Merge for 2 to 3 parameter items only, so select
no less than 2 or no more than 3 items each time when making graph merge.
 To cancel Graph Merge mode, tap the drop-down button on the right side
of the parameter name, and select a data display mode.
Show – tap this option to switch between the two options; one displays
the selected parameter items, the other displays all the available items.
Setting – tap this button to open a setting screen, which allows you to
set the trigger mode, recording duration, and various threshold values
for data recording, and make other controls.
Figure 4-14 Sample Setting Mode in Live Data
There are four navigation buttons on top of the Setting mode screen.
 Selected Button – displays the configuration screen on which you can
set the threshold values, an upper limit and a lower limit, for triggering
the buzzer alarm. This function is only applied to the Waveform Graph
display mode.
a) MIN – tap to open a virtual keyboard, allowing you to enter the
required lower limit value.
b) MAX – tap to open a virtual keyboard, allowing you to enter the
required upper limit value.