Operation Manual
43
Lower connectors installation
(if tted)
Failure to securely attach child restraint to base can result in serious injury
or death.
• Make sure level line on side of child restraint is
level with ground. Adjust base if needed
(see page 19).
• You may need to place a large rolled towel(s) or
foam pool noodle(s) under the front of the base
to achieve correct recline angle.
• Check often to be sure padding is still in place,
the level line is still level and the belt is tight.
NOTE: The carrying handle can be in any
position when installed in the vehicle.
WARNING