Manualshelf

Operation Manual

ManualsBrandsMaxi-Cosi ManualsCar SeatMico AP
31323334353637383940
37
Lower connectors installation
(if tted)
INSTALLING BASE WITH LATCH
• Centre the base between the vehicle anchors
in the chosen seating position.
• Fasten one lower connector to the anchor in
the vehicle seat located in the vehicle seat
bight. Repeat for the other side of base.
See your vehicle owner’s manual for information on designated
lower connector positions, anchor locations and anchor weights.
• Do not use the lower connectors along with the vehicle lap or lap/shoulder
belt.
• Check lower connector strap before each use. Use only if the strap can be
tightened properly and securely.
• Failure to follow these warnings can result in serious injury or death.
WARNINGS