Operation Manual

21
Operation and adjustment
Preparing infant seat to t your child (cont’d)
• Child should be in rearward position as
shown.
• Placethechild’sbottomandbackat
against the child restraint. This will
increase comfort and allow the harness
straps to be properly tightened.
• Check harness height. The shoulder
straps must be in the slots which are
nearest to the child’s shoulders, but not
lower than the child’s shoulders.
• To change the harness height,
Determine which set of harness slots
works best for your child and adjust if
needed.
• Always adjust the height of the shoulder
straps as the child grows.