User Manual

Table Of Contents

0x0C

0x40

KEY_MENU

0x46

Preset bit switching

0x07

0x99

KEY_CVTE_CAM_POS

0x51

Turn off the camera

0x07

0x9a

KEY_CVTE_HANGUP

0x09

5) Function Description

(1) The Bluetooth status of the remote control is not connected, and all the keys of the remote control send

infrared code value.

(2) When the remote control has been paired with the equipment, but is not connected, the remote control

initiates the back connection signal by any key, and initiates the active back connection operation with the

current paired Videobar equipment.

(3) When the remote control and Videobar device have been paired and connected, POWER only sends the

infrared code value, not the Bluetooth code value. Other keys only send the Bluetooth code value

6) Remote control pairing

（1）When Bluetooth is not paired (when there is no Bluetooth pairing record), press and hold the Back

button +Home button on the remote control for 3 seconds at the same time, the remote control will send

the infrared code value 0x0b once, and enter the paired broadcast mode. The broadcast time is 2 minutes.

At the same time, the screen pops up the pairing operation prompt:

（2）Press the mouse button. If Bluetooth is not paired, the screen will pop up the

pairing operation prompt, and then the infrared code value will be sent; If paired, is

the normal mouse switch function.

（3）When the remote control has been paired with the Vediobar device but is not connected, press any

button of the remote control to initiate active connection back operation with the current paired Vediobar

device.

(4) After successful pairing, the screen will display a prompt icon indicating successful connection and close