Speakerphone User Manual Note: All the pictures in this manual are for reference only,
please refer to the actual product.
Contents 1. Important Information................................................... 1 2. Safety Warnings and Precautions ................................ 1 3. Statement .................................................................... 6 4. Product Appearance .....................................................7 5. Connection modes....................................................... 9 6. Direction for use .........................................................15 7.
1. Important Information This manual contains the precautions and the product usage. Please read and understand all the instructions before using the device. The damage caused by failure to follow the instructions is not covered by the warranty. Please keep this manual properly. 2.
prompt provided by the customer service center before using it again. 2> Never place this device and accessories near the burning flames or other heat sources, Including direct sunlight. 3> This device should be turned off and unplugged before lightning storms. ➢ Be careful of short circuit or catching fire! 1> Before connecting this device to an electrical outlet, please make sure that the power supply voltage matches the voltage value printed on the back or bottom of the product.
➢ Be careful of injury or damage this speaker! 1> Never place this device or any objects on a power cord or other electronic devices. 2> If this product is transported at a temperature below 5℃, please unpack the product and wait until the temperature reaches room temperature before connecting it to a power outlet.
leave at least 4 inches space around the product for ventilation. ➢ Children's health 1> This device and accessories may contain some small parts, please keep them out of the reach of children to avoid danger. ➢ Care for the product! 1> Clean this device only with a piece of microfiber cleaning cloth. ➢ Care for the environment! 1> This device applies recyclable high-performance materials and components. Never dispose of this product with other household wastes.
Please understand the local regulations on the sorting collection of electronic, electrical products and batteries. 2> Proper disposal of these products helps to avoid potential negative effects on the environment and human body health. ➢ Maintenance & servicing 1> Please contact professional service personnel for all repair services; 2> Please do not insert any sharp object into the inside of the device; 3> Please do not drop or hit the device to avoid damaging it.
3. Statement 1> Intellectual property right statement: The hardware design and software of this product are covered by the patents. Anyone who reproduces this product or the content of the instruction without the authorization of the Company shall assume legal liabilities. 2> This manual is for reference only, and the actual function of the final product is subject to the actual function of the product received by the customer. 3> The picture is for reference only, please refer to the actual product.
4.
a. USB Type-C port b. Microphone (8 array microphone) c. Bluetooth Button d. Power Button e.Volume down Button f. Volume up Button g. Turn on/off microphone Button h. Answer/hang up Button i.
5.
➢ Support for a dual-device wireless cascade Note: See Bluetooth Status /Setting for device cascading operations. (1) Support for USB, Dongle, Bluetooth multi-channel simultaneous use: It supports multi-channel data fusion of USB, Double Bluetooth. It can work in three connection modes at the same time to support simultaneous access of multiple parties for the conference.
Mode 1: Connect the computer/Intelligent Flat Panel (Windows or Mac) to this device via USB cable. Mode 2: Connect this device with Bluetooth. The Bluetooth indicator will flash to indicate that the device is in Bluetooth pairing state. Enable Bluetooth functions on mobile phones/other devices, and select to connect this device from the Bluetooth device list.
Mode 3: Optional USB Dongle (supporting win7/8/10 and Mac OS), operating as follows: ① Insert the USB Dongle into the computer(If you use a USB Dongle to connect to the Intelligent Flat Panel, please connect it to the frontmounted USB port of the Intelligent Flat Panel to ensure best use effect), USB Dongle will be automatically connected to the device(which is the only device bound by USB Dongle); ② If it is necessary to re-pair the wireless speakerphone to the new USB Dongle, the distance between the U
within 3 meters. When Bluetooth is disconnected from the wireless speakerphone, long press and hold the Bluetooth button for 9 seconds to enter the re-pair.After plugging the USB Dongle, the USB Dongle will be re-pair successfully within 30 seconds. Note: to connect computer/Intelligent Flat Panel with USB Dongle, it is necessary to set this device as the default playback and recording device in the computer/Intelligent Flat Panel sound setting interface.
terminal system settings and turn it on; ② The NFC sensing area touches the device; ③ Touch for no less than 2 seconds; if there is no reaction, please try again.
6. Direction for use ➢ Turn on/off the device Long press and hold the power key for 2 seconds to turn on or off the device. ➢ Answer/hang up call *This device can only use the function of answering and hanging up the phone when connecting to the phone. (1) When there is an incoming call, press the“ ”key to answer the call. (2) When it is in calling state, press the“ ”key to hang up the call.
the“ ”key for 3 seconds to reject the call. ➢ Turn on/off microphone Short press the microphone mute key to turn the microphone on , the red light means microphone turn off, and the white light means microphone turn on. ➢ Volume adjustment Press volume "+" and volume "-" keys to increase or decrease the volume accordingly, Long presses can be quickly adjusted.
(2) When charging, the power light flashes; when full charge, the light is always on. ➢ Checking the battery capacity In the power-on state, short press the power key to view the current remaining battery capacity.When the Light ring is full of light, the battery is full. When the battery capacity is relatively low, the power button's red indicator light will flash and the low battery capacity tone is broadcast.
(2) When Bluetooth is not connected, long press to turn Bluetooth on/off; (3) When Bluetooth is connected, long press to disconnect the current Bluetooth connection ➢ Bluetooth status/Setting Status Operation Description Enter to re-pair mode Long press Dongle is not Pairing: the white light is Bluetooth connected. flashing successful Button 9s. pairing: the blue light on. Bluetooth is not Long press Turn off Bluetooth connected. Bluetooth the white light on.
Button 2s. Status Actionable Description Enter the wireless Bluetooth not cascade pairing connected/ Double click connected the Bluetooth (wireless cascade button. Pairing: the blue light is flashing; Successful pairing: the unpaired). blue light on. Double click Wireless cascade Disconnect the wireless the Bluetooth paired. cascade connection. button.
Long press Bluetooth is Disconnect Bluetooth the Bluetooth connected. connection. button for 2s. Click Bluetooth is Bluetooth Play/ pause the music. connected. button. 7. Common faults and troubleshooting The following table contains common faults and their solutions. Please read it carefully.
Unable to turn on the Low or no Connect the device. electricity. adapter to charge. Insufficient Connect the battery capacity. adapter to charge. Possible Cause Solution Is the connection Select the correct correct? Is the sound source volume turned input; adjust the on? device. Shut down automatically after running for a while. Fault No sound.
Is there any Please use the mistake in using original USB cable the USB cable? to make a call. Unable to work with USB. Long press Invalid key. The key may and hold the power be accidentally button for Touched. 8seconds to reset the system. The charging Replace it with a Unable to charge the device is in fault charging device device. or the battery is with normal already full. functions.
8. FCC Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
void the user's authority to operate this equipment. FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
9.
