MSDS

IDH number: 1390595 Product name: Loctite® PL® Premium Polyurethane Construction Adhesive
Page 2 of 6
3. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous components CAS NUMBER %
Talc 14807-96-6 30 - 60
Methylenebis(phenylisocyanate) 101-68-8 10 - 30
Hydrocarbon C11-25 dearomatized 64742-46-7 10 - 30
Methylene bisphenyl isocyanate 26447-40-5 1 - 5
Diphenylmethane-diisocyanate, isomers and homologues 9016-87-9 1 - 5
Quartz (SiO2) 14808-60-7 0.1 - 1
4. FIRST AID MEASURES
Inhalation:
If inhaled, immediately remove the affected person to fresh air. Immediate
medical treatment necessary.
Skin contact:
Wash affected area immediately with soap and water. If symptoms develop
and persist, get medical attention. Remove contaminated clothes.
Eye contact:
In case of contact with the eyes, rinse immediately with plenty of water for 15
minutes, and seek immediate medical attention.
Ingestion:
Do not induce vomiting. Rinse the mouth. Drink plenty of water. Immediate
medical advice necessary.
Notes to physician:
An individual having a dermal or pulmonary sensitization reaction to this
material should be removed from further exposure to any
diisocyanate.Treatment based on judgement of the physician in response to
reactions of the patient.
5. FIRE FIGHTING MEASURES
Flash point:
> 200 °F (> 93.33 °C) no method
Autoignition temperature:
No information available.
Flammable/Explosive limits - lower:
1.6 %
Flammable/Explosive limits - upper:
10.2 %
Extinguishing media:
Water fog. Foam Carbon dioxide.
Special firefighting procedures:
Wear self-contained breathing apparatus and full protective clothing, such as
turn-out gear. In case of fire, keep containers cool with water spray.
Unusual fire or explosion hazards:
None known
Hazardous combustion products:
Nitrous gases Irritating fumes. Isocyanate vapors.
6. ACCIDENTAL RELEASE MEASURES
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected
personnel.
Environmental precautions:
Do not empty into drains / surface water / ground water.
Clean-up methods:
Ensure adequate ventilation. Scrape up spilled material and place in a closed
container for disposal. Wear suitable protective clothing, gloves and eye/face
protection.