User's Manual

MAXFOR Technology Inc.
MAXFOR Technology
#2305, U-Tower, (Yeongdeok-dong)120, Heung
deok Jungangno, Giheung-gu, Yongin-si,
Gyeonggi-do, Korea
6. Operation
1) Power ON/OFF
Plug in the adaptor and MFA-200 turns on automatically with LCD display. For meter warm up, then
enters normal mode with current CO
2, temperature and humidity readings displayed.
2) Taking Measurement
MFA-200 starts taking measurement after power on and updates readings every setting period. In the
condition of operating environment change (ex. from high to low temp.), it takes 30 sec to respond for
CO
2, temperature and humidity sensor.
7. LCD screen configuration
1) Initial Screen
2) Basic Type (Temperature, Humidity, CO2)
- At the top of the sensor type, the value is displayed on the bottom.
- 'Temp' is displayed in the temperature ℃.
- 'Humi' the humidity is expressed in% RH.
- 'CO2' is displayed in the ppm.
3) Expansion Type (Temperature, Humidity, CO2, CO)
- Before the colon (:) displays the type of sensor, and displays the value of the back.
- 'T' is the temperature expressed in units of ℃.
- 'H' and the humidity is expressed in% RH.
MQEP-22-04 ( 7 / 9 ) R.0
㈜ 맥 스 포
A4(210×297mm)