Owner`s manual

Setting Up Your TV 16
FILE LOCATION: E:\workarea\customer\MAXNET\061101_ML-3731Manual-revisions\ch2e.fm
DELL CONFIDENTIAL – PRELIMINARY 12/7/06 – FOR PROOF ONLY
Using the Component Connector
1 Turn off the TV and unplug the power cord.
2 Connect your device using the component video and audio
cables.
3 Plug in the power cords for the TV and devices and turn them
on.
4 Enter the TV Menu and select AV3 or AV4. See "Input Select"
on page26 for more information.
Using the HDMI Connector
1 Turn off the TV and unplug the power cord.
2 Connect your device using the HDMI connector.
3 Plug in the power cords for the TV and devices and turn them on.
4 Enter the TV Menu and select HDMI 1. See "Input Select" on page26
for more information.
Using the RGB Connector
1 Turn off the TV and unplug the power cord.
NOTE: Suggest to use a RGB cable which has a ferrite core.
2 Connect the RGB and audio cables to your TV and computer.
3 Plug in the power cords for the TV and devices and turn them on.
4 Enter the TV Menu and select VGA. See "Input Select" on page26
for more information.