ML-3251HLT
LCD TV OWNER' S MANUAL IMPORTANT: The serial number of this product may be found on the back of the unit. You should record the number and other vital information here and retain this manual as a permanent record to aid identification in case of theft. Serial numbers are not kept on file. Model No: ML-3251HLT Serial No: IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
ENGLISH IMPORTANT INFORMATION WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not approved by the manufacturer could void the user's authority to operate this equipment. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. SERVICE INSTRUCTIONS: No user-serviceable parts inside, refer servicing to qualified service personnel. "Note to CATV SYSTEM installer.
Cleaning - Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid or aerosol Cleaners. Water and moisture - Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
ENGLISH IMPORTANT SAFETY INSTRUCTIONS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) Read these instructions thoroughly. Keep these instructions for future reference. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
IMPORTANT INFORMATION ................................................................................................................. 1-2 IMPORTANT SAFETY PRECAUTIONS .................................................................................................. 2-3 IMPORTANT SAFETY INSTRUCTIONS ................................................................................................. 4-4 CONTENTS ...................................................................................................
ENGLISH SUPPLIED ACCESSORIES Make sure the following accessories are included in the product packaging. 1. Remote Control x 1 2. “AAA” Size Battery x 2 3. Instruction Manual x 1 4. Quick Start Guide x 1 5. Warranty Card x 1 Quick Start Guide WARRANTY User @Manua l AAA Size Battery Remote Control Instruction Manual Quick Start Guide Warranty Carde PREPARATION Using the Remote Control Use the remote control by pointing it towards the remote control sensor window on the main unit.
ENGLISH PREPARATION (Continued) Antenna Connection NTSC & ATSC (DTV) input connection DTV (ATSC) and traditional NTSC broadcasts are distinctly different and requires two separate connections. There are two types of connectors: one for DTV (ATSC) and one for traditional TV (Analog NTSC). If you are currently subscribing to regular TV from your local cable TV provider or via an antenna, use the Analog (NTSC) connector to receive regular TV broadcasts.
ENGLISH CONNECTORS OVERVIEW 1. ANALOG TUNER ANTENNA Connect to antenna plug with UHF/VHF antenna or cable system. 2. DIGITAL TUNER ANTENNA Connect to antenna plug with ATSC system. 3. PC IN Connect to the video output jack on your PC. Connect to audio out of your PC. 4. COMPONENT IN Connect the component video input terminal to the component output terminal of the video out device. Connect the audio input terminal to the audio output terminal of the video output device. 5.
Button Descriptions 1 8. MENU Press to display the menu screen. 9. SLEEP Press repeatedly to call up the Sleep Timer menu for setting the sleep timer. 10. / / / / OK / FAV Press to move the cursor on screen to select an item and press the "OK/FAV " button to execute. In TV mode, press OK/FAV repeatedly to select the favorite program, If you have set the favorite program. 11. EPG/PBC In ATSC, press to display EPG (Electronic Program Guide) menu.
ENGLISH REMOTE CONTROL OVERVIEW (Continued) Button Descriptions 23 24 25 26 27 28 29 30 31 32 33 34 35 36 29. A-B Repeats playback between A and B. Press once to insert A point and press again to insert point B. To cancel the function, press this button again 30. EJECT Eject the disc from the DVD player. 31. SUBTITLE In the DVD function,press to select the desired subtitle language(if available). 32. ZOOM Press to ZOOM picture during DVD playback. 33.
ENGLISH CONNECTING EXTERNAL DEVICES Connecting a DVD or Digital Set-Top Box Connecting a VCR For best result , use this connection if your DVD player or digital set-top box has component video (Y, Pb/Cb, Pr/Cr ) jacks. You can use the S-Video terminal when connecting a VCR and other audio visual equipment (if there is an S-VIDEO output on the VCR. If there isn't, use the VIDEO (AV) terminals).
ENGLISH CONNECTING EXTERNAL DEVICES (Continued) Connecting a Personal Computer 1. Use a HDMI-DVI cable to connect the jack to the DVI jack on your PC. 2. Connect computer sound card to 3.5mm phone jack. 3. Select "HDMI" using SOURCE button on the remote control or front panel. 1. Use a VGA cable to connect the jack to the VGA jack on your PC. 2. Connect computer sound card to 3.5mm phone jack. 3. Select "PC" using SOURCE button on the remote control or front panel.
ENGLISH SELECTING MENU ITEMS When Input Source is TV, AV This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps and then refer to the indicated page for details. 1 Press MENU to display the MENU screen . 2 Press either the / / / buttons on the remote control panel to select the sub-menu. 3 Press EXIT on the remote control to exit .
ENGLISH SELECTING MENU ITEMS (Continued) When Input Source is PC This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps and then refer to the indicated page for details. 1 Press MENU to display the MENU screen . 2 Press either the / / / buttons on the remote control to select the sub-menu. 3 Press EXIT on the remote control to exit .
ENGLISH BASIC OPERATION (Continued) Changing the Volume on the remote control 1 2 Press VOL ( + ) to increase the volume. The bar indicator shifts to the right. Press VOL ( - ) to decrease to volume. The bar indicator shifts to the left. To mute the sound 1 Press MUTE to temporarily turn off the sound. “ Mute” is displayed on the screen. 2 Press MUTE or VOL ( + )/( - ) to turn the sound back to previous level.
ENGLISH DISC PLAYBACK Inserting Media 1. Insert the disc, with the label facing the same direction as the front of the LCD display, into the disc slot. 2. Make sure the media type is set to disc. Playing Media To start playback press .. To interrupt playback, press again. NOTE Some discs start playing automatically, and others display a menu on the TV screen. Use the arrow buttons to select a chapter or track, or press the number keys (0~9) to go to the desired chapter or track.
ENGLISH DISC PLAYBACK (Continued) Program Play You can play the contents of the disc in the order you want by programming the order of the tracks to be played. 1. While playback is stopped, press PROGRAM to enter program mode. 2. Use the number buttons (0~9) to input the track number in the order you want. 3. Repeat step 2 to store other tracks. 4. To start the program play, press . 5. To stop playback, press once. 6. To cancel the program, press again.
ENGLISH DISC PLAYBACK (Continued) Angle Selection Some DVD discs contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scenes can viewed from each of the different angles. To Change Angles Press the ANGLE button to change the scenes from one angle to other angles. Picture Zooming This function allows you to enlarge the picture on the TV screen and enlarge the image. 1.
ENGLISH DISC PLAYBACK (Continued) SPDIF Out If your format of disc is Dolby Digital, select the PCM or RAW (Bitstream) output. 1. PCM: Select when connecting to a 2-channel digital stereo amplifier. The unit’s digital audio output will only output 2-channels even if it is encoded with multichannel Dolby Digital tracks. 2. Bitstream: Select Bitstream when connecting to an external amplifier capable of decoding Dolby Digital multi-channel audio. 3. OFF: Select OFF if you don’t need SPDIF Out.
ENGLISH ADJUSTMENT Adjusting Picture settings Directly adjust Picture setting using the remote control PICTURE 1 Press the PICTURE button to display the Picture screen. 2 Press / to move the cursor to Picture menu, then press 3 Press / to move the cursor to the desired item. 4 Press / to change the setting. 5 Press EXIT to close the menu screen. . PICTURE Picture adjustments have different menu options depending on if you are in TV mode or PC mode. 1 Press MENU to display the MENU screen.
ENGLISH ADJUSTMENT (Continued) Sleep Timer Function You can set the Sleep Timer to automatically turn off the TV. Directly setting the Sleep Timer using the remote control 1 Press the SLEEP button to display the Timer TIMER screen. SLEEP 2 Press / button to set the sleep timer (in SLEEP TIMER OFF EASTERN TIMER ZONE 3 minutes), the timer can be set from 15 minutes up to 120 minutes (Off > 15 >30 >60 >. 90 >120 ). Press EXIT to close the menu screen.
ENGLISH ADJUSTMENT (Continued) Setting of V-Chip TV Ratings Content based FV (Fantasy Violence) RATING S (Sexual Situation) L (Adult Language) D(Sexually Suggestive Dialog) * * * * * * * * * * * * * TV-Y (All children) TV-Y7 (Direct to Older Children) Age based V (Violence) x TV-G (General Audience) TV-PG (Parental Guidance Suggested) x x x x x x TV-MA (Mature Audience Only) x x x * : The content rating can be set, but this rating is not normally broadcasted by TV stations.
ENGLISH ADJUSTMENT (Continued) Adjusting CLOSED CAPTION Settings SETTING CLOSED CAPTION "Closed Caption" is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen. Not all programs and videos will offer closed captioning. Please look for the "CC" symbol to ensure that captions are available. Closed Caption broadcasts can be viewed in two modes: CAPTION and TEXT. For each mode, four selections are available.
ENGLISH ADJUSTMENT (Continued) Returning Settings Back to Factory Defaults To let you set TV system back to the factory default settings 1. Press MENU to display the MENU screen . 2. Press the buttons to select the System, then press . 3. Press the buttons to select the Factory Reset item, and then press . 4. “All tuning data will be erased” appear, please press ASPECT (Green) button to start. 5. “All tuning data will be erased. Are you sure” appear, please press ASPECT (Green) button again to execute.
ENGLISH TROUBLESHOOTING Remote Control Problem Remote control does not operate Possible Remedies z The batteries could be weak. Replace the batteries. z Check the orientation of the batteries. z Make sure this unit’s power cord is connected securely to the wall outlet. z Locate the unit at least 3-4 feet away from fluorescent lights. z Be sure the main source has been selected to “TV". z If you are using another device to change channels, be sure to select correct source for that device.
ENGLISH TROUBLESHOOTING (Continued) Audio Problem Possible Remedies Good picture, no sound z Audio noise z Cannot gain enough volume when using a cable box Sound volume seems weak or insufficient z z Turn up the volume by pressing the VOL + button on the remote or on the side of the TV set Move away the infrared transceiver from the TV until the noise is eliminated. Increase the volume of the cable box using the cable boxes remote control.
ENGLISH SPECIFICATIONS (Continued) LCD TV Section ITEM DESCRIPTION Screen size 32” diagonal Aspect Ration 16:9 Contrast Ratio 1200:1 Brightness 500nits High Color Saturation NTSC 75% Resolution 1366 x R.G.B x 768 Pixel Pitch 0.173 (H) X 0.519 (V) mm Display Colors 16.7M Response Time gray to gray average time 6.
ENGLISH SPECIFICATIONS (Continues) PC Compatiblity Chart Supported Resolutions for RGB Mode This monitor supports the following resolutions Dot x Line Horizontal Freq.(KHZ) Vertical Freq.(HZ) 640 × 480 @ 60Hz 31.47 59.94 800 × 600 @ 60Hz 37.88 60.32 1024 × 768 @ 60Hz 48.36 60.00 1366 × 768 @ 60Hz 48.00 60.00 720 × 400 @ 70Hz 31.47 70.09 Supported Resolutions for HDMI Mode Dot x Line Horizontal Freq.(KHZ) Vertical Freq.(HZ) 720 × 480i @ 60Hz 15.73 59.94 720× 480p @ 60Hz 31.47 59.
