User Manual
• Main Unit
×
1
• Ear Hook
×
1
• Earpiece
×
1
• Charging USB Cable
(USB to Micro-USB)
×
1
• User Manual
×
1
Power input: Micro USB DC 5V
Charging time: Approx. 1 – 1.5 Hours
Talking time / Music time: Approx. 3 Hours
Standby time: Approx. 50 Hours
1) Connect the charging cable to the USB port of your computer or to a
USB charger.
2) Connect the cable’s Micro USB plug to MXH-HS03’s charging port.
The LED indicator on MXH-HS03 will light red when charging, and light
blue when fully charged.
When the battery level is low, the LED indicator will flash red and alert tone will
be heard by the user. If the battery level runs out, the MXH-HS03 will turn off
automatically. The user should stop using the MXH-HS03 and charge the
headset for the next use.
Charging
Remarks:
Appearance of the MXH-HS03 Bluetooth® headset
1. Turn On: When the headset is off, press and hold the MFB button for 5
seconds to turn on the unit and it will enter the pairing mode. Blue and red
LED flashing alternatively.
2. Pairing: Follow the instruction of your Bluetooth-enabled device to pairing,
select ‘MXH-HS03’ from the list displayed on the Bluetooth-enabled device.
Once pairing is successful, Blue LED flashing once every 5 seconds.
Remark: If a PIN code is required for paring, the default is: 0000
3. Turn Off: When the headset is on, press and hold MFB button for 5 seconds,
Red LED flashing 3 times and then turns off.
4. Auto Off: Once the MXH-HS03 is not connected to any device for 3 minutes, it
will turn off automatically.
Turn On/Off and Pairing
Phone Call
Receive a call
End call
Reject call
Redial
Volume control
Call waiting
Music Playing
To play/pause the music
Next track
Prev. track
Volume up
Volume down
*Functions may be varied according to different devices.
Operations
• Connected (Stand-by)
• Pairing
• Charging
• Charging finished
• Low power
Indications
Warnings
: Short press the MFB button
: Long press the Volume “+” button
: Long press the Volume “-“ button
: Short press the Volume “+” button
: Short press the Volume “–“ button
Multi-function button (MFB)
Power ON / OFF,
Ans / End / Reject call,
Music Play / Pause
Volume+/ next track
Micro USB
charging input
LED Indicator
Earhook
Volume-/previous track
Mic
1. Do not put the headset into fire, or expose to sources of high temperature.
2. The headset is not waterproof. Do not put into water or other liquids.
3. Calling during driving is not recommended for road safety considerations.
4. Music playing during driving might be an offense of local laws in some regions.
User should check with local authorities and decide the usage of the headset
under their own responsibilities.
5. Headset play time will vary with different devices, volume and environments.
6. Operation range is up to 10 meters line-of-sight in an open and clear
environment.
7. Functions may be varied according to different devices.
The specification may change at any time without advance notice. Maxell
reserve the rights for any modification of this product.
Hereby, Maxell Asia, Ltd. declares that the radio equipment type
MXH-HS03 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address:
www.maxell.eu
Please disposal of waste batteries and electrical and electronic
equipment (applicable in the European Union and other European
countries with electronic collection systems)
With this symbol on the product, battery or packaging, the product
and battery shall not be disposed as household waste.
This symbol may be used in combination with a chemical symbol Hg (mercury),
Cd (Cadmium) and Pb (Lead) if the battery contains more than 0.0005% mercury,
more than 0.002% cadmium or more than 0.004% lead.
At end-of-life it should be dropped off at the collection point for the recycling of
electrical and electronic equipment.
The proper disposal of the product and battery would help preventing
potentially negative impact to environment and human health.
For more information about the collection points and recycling of product and
battery, please contact your local authorities.
MXH-HS03
What is in the pack:
Content
User Manual
: Blue LED flashing once every 5 seconds
: Blue and red LED flashing alternatively
: Red LED On continuously
: Blue LED On continuously
: Red LED flashing and an alert tone will be sounded
: Once there is an incoming, an indication ring tone will be heard.
Short press the MFB button to pick up the call.
: The user can press the MFB button once during a call to end it.
: When the user wants to reject an incoming call, press and hold
the MFB button for 2 seconds.
: Double click the MFB button to redial the last dialed phone
number
: During a call, press the Volume “+” button to increase the
volume or the Volume “-” button to decrease the volume
: When the user is already on a call and there is another incoming
all, the user can take the new call (and keep the original call
waiting) by pressing and holding the volume "-" button for 3
seconds. By the same operation, the user can switch between
the two calls. The user can end the current call by a short press
of the MFB button
1. Do not burn or bury batteries.
2. Do not puncture or crush.
3. Do not disassemble.
4. Li-ion batteries must be recycled. Do not dispose of in the trash.
5. Only use rated charger for Li-ion cells. Be sure the charger’s voltage and current
settings are correct for the device being charged.
6. Charge batteries on a fireproof surface and away from flammable items or
liquids.
7. Batteries should NEVER be left unattended while charging .
8. Keep out reach of children when the product is being charged.
9. Follow the manufacturer’s instructions for charging the product.
Battery Note and Care