User manual

-During the Charging process, please check the connected device charging
display. If the charging is complete, it will stop and the LED display will turn
OFF automatically. When the charging is complete or to stop it during charge,
please disconnect the cable. (Please note depending on the device situation,
the charging may stop automatically just before reaching 100% charge. If it is
100% fully charged, the LED lights will not turn OFF).
Attention!
When 2 Smartphones are charging simultaneously, please use a compatible
cable for OUT1 connection and use the enclosed cable for OUT2 connection.
The total current output is 5V / 2A (OUT1+OUT2 ports), If the connected
devices are out of this current value, it will not be enough power to fully charge
the devices. When the device is at zero battery level or depending on if the
device is in use whilst charging, boosting time be longer or the device may not
as quickly as it should. Please check before charging. Maxell warranty does
not cover any accidental loss of your data.
Maintenance:
Use cloth with neutral cleansing agent or water to remove the dirt from the
product body and use a soft dry cloth to clean it. Do not use gasoline, thinner
or alcohol etc.
Troubles Shooting:
Please contact the Customer Service department if below troubles cannot be
solved.
Trouble Shooting
Reasons
Countermeasures