User manual

-Charging time (the USB AC Adaptor DC5V / 1A)
0 to 80%：around 6hrs
0 to 100%：around 10hrs
Attention!
Please confirm the port direction before connection. Incorrect connection may
damage the product. Please end charging if your device cannot be fully
charged after a certain period of time. Do not charge this product when it is
connected to another device as this may lead to heat generation or damage to
the product. It could be that the power from the PC’s USB port may not be
sufficient for charging. Charge the product every 6 months even if it is not often
in use, otherwise the product may fully discharge and may not be able to be
charged again.
Charging the Smartphone (It is necessary to use the enclosed USB charging
cable)
- Connect the output port of attached charging cable to the smartphone and
start charging. (For charging iPod, iPhone, iPad, please use the original Apple
charging cable in OUT2. If you connect to OUT1 when the Smartphone/Tablet
battery is discharged, it will take longer to charge or may result in not being
able to charge. For other non-Apple devices (Tablet or Games Consoles etc…)
please use the specified charging cable and connect to OUT1
-The LED light will display the battery capacity level depending on the % of
battery charging level. Press the Power button to start charging normally.