Datasheet

44
Maxell’s new family of HDD Diamond duplicators are more than just a
simple, fast and reliable tool for making an exact copy of any hard drive.
Offering a choice of two models in various configurations, these duplicators
can be used for copying from a source drive of any type, from iVDR-EX
cartridges, *2.5" to 3.5" hard drive or *SSD of either SATA or IDE interface
to a target drive of any kind.
• Great for cloning an iVDR-EX cartridge or a single hard drive or for
making a back up another iVDR-EX cartridge or hard drive
• OS independent
• Copy up to 1.5 Gbps depending on the performance of the iVDR-EX
cartridge or hard drive
• Source and Destination drives are added or removed like tape
cartridges via a drive enclosure from each drive bay. Source drive
enclosure and target drive enclosure are interchangeable
• Completely standalone, one to one, hard drive duplicator with no
additional hardware or software required
• LCM control module provides a rich set of robust advanced
configuration options
*2.5" to 3.5" SATA Converter tray available.
HDD Diamond
Hard Drive Duplicators
SPECIFICATIONS
Maximum # of iVDR-EX Diamond 1:1 Duplicator Diamond 1:5 Duplicator
Cartridges, SATA or SSD Drives
Supported System Trays Source tray – Diamond iVDR, Diamond IDE or
Diamond SATA drive tray Target tray – iVDR or SATA tray
Writing Mode Sector to Sector
LCD display with functional No computer or software required
control panel
Low noise High CFM 1
ball bearing cooling fan
Power Supply 80 Watts 110/220V 400 Watts 110/220V
auto-sense input auto-sense input
Weight 13.75 lb (~6.24 kg) 27.3 lb (12.38 kg)
Dimension (W x D x H) 7.48 x 10.63 x 6.5 inch 7.5 x 16.7 x 17.2 inch
Operating Environment 0°C – 50°C, 15% – 90% RH
Storage Environment -20°C – 50°C, 0% – 95% RH non-condensing
Warranty One Year