User`s manual

Section 4 UPGRADING YOUR NOTEBOOK
4-3
To replace the hard disk drive, do the following:
1. Turn OFF the computer. Unhook the AC cord and all
cables/devices attached to the notebook.
2. Place your hand on a large metal object momentarily to
discharge any static electricity.
3. Locate the hard disk drive module on the bottom of the
notebook.
4. Release the fixing screw-A locked the HDD bay cover.
5. Remove the HDD bay cover as the shown diagram.
6. Now the mental tray protected HDD module and the
fixing screws, B and C, reveal.
7. Release the two fixing screws, B and C, securing the
mental HDD tray and HDD module.
8. Release the two fixing screws, D and E, securing the
mental HDD tray and the unite.
Expanding the Hard Disk Drive
HDD Bay Cover
Fixing Screw-A
Fixing
Screw-E
Fixing
Screw-D
Mental
Tray
Hard Disk
Drive Module
Connector
Fixing Screw-B
Fixing Screw-C