User guide

98 Managing the Storage Solution
4. In the “Add Capacity” box, enter the amount of the selected region to expand the logical drive.
You may use the entire free region space or a portion of it.
5. Click the EXPAND button.
6. You will be prompted to enter your password to confirm the expansion. Type in your password
and click the GO button.
7. You will receive a screen prompt that the command was successful, click the CLOSE button.
If the command was unsuccessful, review the settings for incorrect parameters and hardware
for operational status.
Deleting a Logical Drive
!
Caution
You must stop all host I/O operations prior to deleting an array.
Deleting a logical drive is an option that allows the user to remove an existing logical drive that is no
longer needed or desired. If the logical drive was previously used be sure to make a backup of any
data on the logical drive. After deleting the logical drive, SAN LUN Mapping (if used) and the operating
system will need to be modified due to the missing drive.
1. Stop all host I/O operations.
2. From the Main screen in the Logical Drives section, click on a <logical_drive_name> that you
wish to delete.
Figure 87. Main Screen
The Logical Drive Information window will open.
3. In the Logical Drive section, click the DELETE button.