User guide

85MAXDATA SR1202 M1 – StorView
®
RAID User Guide
Figure 67. Monitoring Progress of Parity Verification
You can stop the Verification process if you wish by clicking on the Stop link located to the right of
the progress bar.
Identifying Drive Members
Should the need arise, you can quickly identify which drives in the enclosure are members of a
specific array.
Located on the right side of an Array name is an icon (Drive Identify icon), whose appearance is like
an arrow pointing to the lower left corner. This is used to turn on the identify function.
Clicking on the Drive Identity icon will cause all drive members of that array in the graphical
representation of the enclosure front view to have the “Drive Identity (arrow)” icon displayed on those
drives. The icon also appears next to each logical drive created from the drives of the array.