User guide

69MAXDATA SR1202 M1 – StorView
®
RAID User Guide
1. From the Main screen click the SAN Mapping button in the Tool Bar.
2. Select a Host HBA port under the “HBA Port Name” section that contains the mapping to be
modified.
3. Select the mapping to be modified from the “MAPPINGS” section.
 NOTE
Make a note of the settings for this mapping to use in step 6.
4. Click the REMOVE MAPPING button.
Figure 51. SAN LUN Mapping Screen
5. You will receive a confirmation, click the OK button to continue, or Cancel to exit and return to
the SAN LUN Mapping window.
6. Add a new mapping.
Refer to your notes from the existing mapping to help create the new mapping. For specific
details, see ”Creating a SAN LUN Mapping” beginning on page 65.
7. Click the APPLY button to save your changes.
 NOTE
If you wish to cancel your changes before you click the APPLY button, click the RESTORE button and
the changes will be cleared restoring the previous settings.