User guide

68 SAN LUN Mapping
Deleting a SAN LUN Mapping
1. From the Main screen click the SAN Mapping button in the Tool Bar.
2. Select a Host HBA port under the “HBA Ports Name” section that contains the mapping to be
removed.
Figure 50. SAN LUN Mapping Screen
3. Select a Mapping to remove from the “Mappings” section.
4. Click the REMOVE MAPPING button and click APPLY.
5. You will receive a confirmation, click the OK button to continue, or CANCEL to exit and return
to the SAN LUN Mapping window.
6. You may continue to
remove more mappings by repeating steps 2 through 5, or end this
session by clicking the CLOSE button.
Modifying a SAN LUN Mapping
In order to make changes to an existing SAN LUN Mapping, you must first remove the existing SAN
LUN Mapping and then re-create it.
!
Caution
Making changes to these mapping parameters may have an adverse affect on other mappings or to
the operating system accessing the logical drive.