User guide

65MAXDATA SR1202 M1 – StorView
®
RAID User Guide
Figure 47. SAN LUN Mapping Example
The SAN LUN Mapping screen is basically divided into two primary sections. The first section on
the left side of the screen encompassed in the box titled “Topology Information” displays the list of
discovered Host HBAs and the current mappings. The second section displayed on the right hand
side of the screen is for adding, modifying and deleting SAN LUN Mappings.
HBA PORTS Name Section
A list of discovered named and unnamed HBA Ports are displayed. You must select a port and identify
it using the displayed HBA Node WWN and HBA Port WWN in the Name Host section. When you
identify the port, it will be very helpful to rename it to a user defined name.
ADD NEW MAP Section
The “Host Port” panel will display the choices to map to for your controller as H0, H1 or Both.
Creating a SAN LUN Mapping
The following are the steps to create a SAN LUN Mapping. The process involves identifying the Host
Port, creating a user defined name, assigning your mapping a LUN number, establishing the access
permissions, and selecting the controller port to make available the mapped logical drive.