User guide

32 Getting Started
Deleting an SNMP Server
1. From the Main screen click on the SETTINGS button.
2. Click the SNMP tab.
3. Click the DELETE button next to the SNMP Server you wish to remove.
4. Click the APPLY button to make the changes effective, a status pop-up notice will appear.
Then click the CLOSE button on the SETTINGS window.
Changing the Password
This option provides the ability to change the access password used at log in.
1. From the Main screen click on the SETTINGS button.
2. Click the PASSWORD tab at the top of the window.
Figure 14. Settings Screen - Password Tab
 NOTE
Passwords will not be displayed as you type them.
3. Type in the Old Password and press the <Tab> key or click in the next text box.
4. Type in the New Password and press the <Tab> key or click in the next text box.
5. Re-type the New Password and click the CHANGE button.
You will receive a confirmation message that the changes were successful. Click the CLOSE
button.
6. Click the CLOSE button on the SETTINGS window.
 NOTE
If you lose or misplace your password, contact technical support for further instructions.