User guide

29MAXDATA SR1202 M1 – StorView
®
RAID User Guide
E-MAIL
Configuring E-MAIL Notices
With a Global license installed, StorView provides you with the ability to establish up to ten E-MAIL
addresses where notices of events can be automatically sent.
Event Type Icons These icons are displayed in the E-MAIL setup. They depict the type of
events that can be selected or isolated for E-MAIL notices.
Information • Information - This icon represents the information type of events.
Warning • Warning - This icon represents a warning type of event.
Error • Error - This icon represents an error type of event.
To configure the E-mail notifications perform the following:
1. From the Main screen click the SETTINGS button.
The Settings window will open with the E-MAIL tab selected.
2. Enter the “name” or “IP address” of your E-MAIL server.
This will be the SMTP mail server name. E-MAIL messages are sent to the E-mail server using port 25.
If your E-mail server is not configured to receive on port 25, then E-mail will not function properly.
Figure 11. Settings Screen - E-MAIL Tab
3. If you would like a signature appended to the message, click the check box and type in the
signature information in the scrollable window provided.
4. Enter the user e-mail addresses as desired.
You may add up to ten (10) e-mail addresses. Type the full e-mail address and click one or more of
the check boxes for the type of event to which the user is to be notified. The types of events are:
Informational, Warning, and/or Errors.
If you have more than five e-mail recipients, you will need to click the button “6 - 10” to access the
next five address blocks.