User guide

22 StorView Quick Tour
Server Section Description and Condition
Remote StorView Servers
Icon
Depicts the discovered StorView servers that you are not logged into.
The icon will indicate the status of its components by changes in the
color and state:
• Flashing White - The server has not responded in at least 40 seconds
and is considered missing. If you would like to remove the missing
server from the list, click the Rescan button. This will refresh the
screen with a current list of discovered servers.
User Icon (located adjacent
to Server icon)
Represents each user logged into the StorView server you are moni-
toring. Placing the mouse pointer over the icon will display the IP
address, host name and the user name.
Storage Solution Icon
(displayed for each storage
solution)
You will also see the warning “!”, error, and unknown icons for unfo
-
cused storage solutions that are being monitored as well.
Normal • Normal Gray - Status is ok.
Warning • Flash Yellow with red “!” - Indicates a component in the storage
solution is in degraded mode.
Error • Flashing Red - Indicates a component in the storage solution has
malfunctioned.
Unknown • Flashing Red with “?”- Indicates that the storage solution was there
at startup but now cannot be located.
Storage Solution: Unmon
-
tored
This icon indicates that another StorView server is monitoring this
storage solution, or if you just performed a rescan then the StorView
servers are still determining which StorView server will take control of
the monitoring of the storage solution.
Controller Icon This icon represents the RAID Controller installed in the enclosure. For
duplex systems (Active-Active), a dual controller image is displayed.
Normal • A green icon represents a normal operating system.
Normal
Error • A flashing red icon appears if the controller’s backup battery unit
has failed, or in Active-Active topologies when the partner controller
has failed.
Module Tabs
RAID
Module
• The tab appears at the top of the Main window and when selected
will focus the monitoring and management functions to specific
systems types. These tabs will flash yellow if a warning condition
occurs and red if an error condition occurs.