User guide

16 StorView Quick Tour
Enclosure Section Description and Condition
Fan Icon (continued)
Fan 2 Failed
(yellow)
• Fan 2 Failed - One fan in the fan module has failed. The fan which
failed will be indicated on the icon.
Failure (red) • Failure - Both fans in the fan module have failed or the cooling fan
module has been removed.
Power Supply Icon Power Supply icons are displayed on the Main screen rear view
image of the enclosure and will change according to the state of the
specific power supply.
Normal • Normal gray icon indicates that the power supply is operating
normally.
Failure • A red flashing icon with “Failure” displayed indicates that the
subject power supply has failed.
Missing • A solid red icon indicates that the power supply is missing.
Unknown • Unknown - This icon indicates the enclosure power supply infor-
mation from the SES processor or SAF-TE processes is missing or
invalid.
SR1202
RAID Controller Animated RAID Controller icons are displayed on the Main screen
rear view image of the enclosure and will change colors according to
their state.
Normal • Normal - RAID Controller is operating normally.
Error • Error - A RAID Controller has failed in an Active-Active topology or
the backup battery has failed.
Empty • Empty - This icon represents the empty controller slot for future
expansion. A blank plate is shown.
Audible Alarm Icon
Off • This icon indicates the alarm is Off (Muted).
On • This icon indicates the alarm is On (Continuous), On (Intermittent),
or On (Remind).
Enclosure Temperature Icon Enclosure temperature icon is displayed just above the rear enclosure
icon and indicates the status of the enclosure temperature.
Normal • Normal - This icon indicates that the temperature is normal. It
appears green.
Warning • Warning - This yellow icon indicates that the enclosure tempera-
ture is approaching the established threshold.
Failed • Failed - This red icon indicates that the enclosure temperature has
reached or exceeded the enclosure temperature threshold. (If the
fans are operating normally and the air flow temperature seems
normal it may be an indication that the temperature sensor is
faulty.
Missing • Missing - This icon indicates that the information from the SES/
SAF-TE regarding the sensors is invalid or missing.