User guide

130 Event Logs
StorView Server Events
 NOTE
These events are applicable to the host-based version only.
The following table provides a brief description of the events which relate to the StorView server
software component. The type [ID] format is: Event type name with its associated ID expressed in
[hexadecimal (decimal (displayed in the OS))].
StorView Server Event
Messages
Type [ID] Cause Action
The server has been
started.
Information
[0x101 (257)]
The StorView Server
started successfully.
No action necessary.
The server has been
shut down.
Information
[0x102 (258)]
The host is shutting
down or a user stopped
the StorView service.
No action necessary.
A system rescan has
been initiated.
Information
[0x103 (259)]
The system rescan is
starting note: a shut-
down and start up
event will follow.
No action necessary.
The serial number and
key entered are incor-
rect. Remote features
are temporarily disa-
bled.
Error
[0x104 (260)]
The serial number and
key specified in the
server settings file is
not a correct match.
Open StorView in
a browser from the
local console, click the
Settings button. Re-
enter the serial number
and key. If you still
have problems, contact
technical support.
All event logs cleared. Information
[0x105 (261)]
A user cleared the Stor-
View event logs.
No action required.
A user <name> has
updated their pass-
word.
Information
[0x106 (262)]
A specific user has
updated their pass-
word.
No action required.
A user <name> from
Host: <host name>, IP
Address: <IP_address>
unsuccessfully
attempted to update
their password.
Information
[0x106 (262)]
A specific user tried to
change the password
but verification failed or
old password failed.
Ensure the user is
authorized or needs
assistance.
A user <name> has
logged into the Server
from Host: <host
name>, IP Address:
<IP_address>.
Information
[0x106 (263)]
A specific user has
logged into the Stor-
View Server from the
specified host and IP
address location.
No action required.