User guide

123MAXDATA SR1202 M1 – StorView
®
RAID User Guide
Drive & Array Event
Messages
Type [ID] Cause Action
A RAID 5/50 parity
check has started on
<Array Name>. Type of
parity check = <parity-
type>.
Error
[0xB43 (2883)]
Parity check started. No action necessary.
A RAID 5/50 parity
check has completed on
<Array Name>. Type of
parity check = <pari
-
tytype>. Error Count =
<zz>.
Error
[0xB44 (2884)]
Parity check completed. No action necessary.
A RAID 5/50 parity
check has been aborted
on <Array Name>. Type
of parity check = <pari
-
tytype>. Error Count =
<zz>
Error
[0xB45 (2885)]
Parity check canceled
by the user.
No action necessary.
A drive w/SN (SAS:
w/WWN) (Slot <nn>,
Enclosure <nn>) has
been inserted.
Information
[0xB61 (2913)]
Drive was inserted. No action necessary.
The controller has
started updating a
drive’s firmware. Drive
w/SN (SAS: w/WWN)
<xxxxxx> (Slot <nn>
ID:<zz> Firmware
Version:<yy.yy.yyyy).
Information
[0xB66 (2918)]
The controller has
started updating a
drive‘s firmware. Drive
<w/sn or w/wwn>,
Slot <nn>, Enclo-
sure <nn>, Firmware
Version:<xxxx>
No action necessary.
The controller has
finished updating a
drive’s firmware. Drive
SN: (SAS: w/WWN)
<xx xx xx xx xx xx>
ID:<zz> (Slot <number>)
Firmware Version: <yy.
yy.yyyy).
Information
[0xB67 (2919)]
The controller has
finished updating a
drive‘s firmware. Drive
w/SN or WWN <xxx>,
Slot <nn>, Enclo-
sure <nn>, Firmware
Version:<xxxx>.
No action necessary.