Operating instructions

Commissioning
45
Set count A
999999
0.0
End value/start value for preset counter; refers permanently to relay 1.
Set count B
999999
0.0
Value for preliminary alarm; refers permanently to relay 2.
Totalizer
9999999 In this position, the totalizer can be displayed and edited (e.g. assigned
a default value).
!
Note!
The counter starts again at 0 if the maximum value of 9999999 is
exceeded.
Reset total
No
Yes
Reset totalizer
!
Note!
Cannot be configured via ReadWin
®
2000.
Calc. flow
No
Curve
Formula
For selecting a method of calculating the total flow based on the
channel type or by means of a formula using the analog input signal
(e.g. level signal)
•No = no integration
• Curve = flow calculated with channel type.
If "Curve" is selected, the menu only displays possible channel types
for configuration (e.g. Venturi channels, Parshall channels, weirs
etc.)
• Formula = flow calculated using a formula
If "Formula" is selected, the menu only displays possible
configuration parameters for entering the formula (Alpha, Beta,
Gamma, C).
Here, the flow is calculated using the following formula:
Dim. input
mm
inch
Dimension of the channel size
Dec. flow
XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Decimal point for display
Function
(menu
item)
Parameter
setting
Description