Operating instructions

Commissioning
44
6.3.6 INTEGRATION/M18
This function can only be selected if the pulse output option is available in the device.
!
Note!
If the preset counter function (Batch) is used, digital input 1 and relay 1 and 2 are permanently
assigned to this function. Configuration for these inputs/outputs is then not possible.
Function
(menu
item)
Parameter
setting
Description
Ref. integr.
Input
Lintab
Selects which value should be integrated.
• Input = measured value
• Lintab = linearized measured value or current flow value for
channel calculation
Pre-counter
Off
Count up
Count down
Activation of the preset counter
Off = preset counter off
Count up = counting up from zero to the end value
Count down = counting down from the start value to zero
Integr. base
Off
sec
Min
hour
day
Time basis for integration
Dec. factor
XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Decimal point position of the conversion factor
Factor
0..99999
1.0
Conversion factor
Dimension
XXXXXXXXX Select the dimension from the list or dimension as free text (max. 9
characters long).
Dec. point T
XXXXX
XXXX.X
XXX.XX
XX.XXX
X.XXXX
Decimal point of totalizer