Operating instructions

Operation
22
Relay display
No power to relay: no display
Power to relay: (symbol lit)
Digital input status display
Digital input configured: (green)
Signal at digital input: (yellow)
!
Note!
Information on troubleshooting can be found in Sections 9.1 and 9.2 of these Operating
Instructions.
5.3 Local operation
Operating menu activated by pressing the jog/shuttle dial for 3 seconds at least.
5.3.1 Operation via the jog/shuttle dial
A) E+H 3-key function
Input current below
upper error limit and
above upper
limitations of validity
Display " " Normal limit value
behavior
Normal behavior
with max. 10%
overrange. No
output < 0 mA
possible.
Normal behavior
(negative integration
not possible)
Input current above
upper error limit
Display " " Fault condition Set failsafe mode No integration
Range Display Relay Analog output Integration
G09-RIA452ZZ-19-00-00-xx-002
Fig. 10: Operation via jog/shuttle dial
• Press = "Enter"
• Rotate in clockwise direction = "+"
• Rotate in counterclockwise direction = "-"