Operating instructions

Operation
20
M20 Min/Max
memory
MIN/MAX
Signal source
for Min/Max
Decimal
point
Display
minimum
value
Ref. min/max Dec. point Min. value
Display
maximum
value
Reset
minimum
vaule
Reset
maximum
value
Max. value Reset min Reset max
M21 Linearization
table
LIN-TABLE
Number of
support points
Dimension of
linearized
value
Decimal
point Y-axis
Delete all
support
points
Display all
support
points
Counts Dimension Dec. Y value Del points Show points
M23-
Mxx
Lin. support
points
NO 01 NO
32
X-axis Y-axis
X value Y value
M55 Operating
parameters
PARAMETE
RS
User code Limit value
lock
Program
name
Program
version
Pump
alternation
function
User code Limit lock Prog. name Version Func. alt.
Relay lock
time
Relay failsafe
mode
Time for
gradient
evaluation
Failsafe
mode 4-20
mA input
Error limit 1
Lock time Rel. Mode Grad. Time Namur Range 1
Error limit 2 Error limit 3 Error limit 4 Display
contrast
Range 2 Range 3 Range 4 Contrast
M56 SERVICE Only for service staff. The service code must be entered.
M57 EXIT Exit the menu. If you have changed parameters, you are asked whether you want to save
the changes.
M58 SAVE Changes are saved and you exit the menu.
*) Only available if the option in question is installed in the device