MAXDATA Notebook PRO 5000 IR User's Manual UK
48
Contents Note 51 Important Safety Information 55 Shipping Contents 63 Preparation 65 Wireless LAN .................................................................................................................. 57 Additional safety notes for units with wireless LAN ....................................................... 58 CE-labelling for units with wireless LAN and Bluetooth ............................................. 59 Restrictions ............................................................
Installation Instructions 81 Specifications 83 Fault Diagnosis and Troubleshooting 87 Index 89 Restoring the Drivers....................................................................................................... 81 The Utility CD .................................................................................................................. 81 Setting the Resolution .....................................................................................................
Note The company reserves the right to make unadvertised modifications to this document. Information contained in this document is intended solely for reference purposes and in no way constitutes a basis for asserting obligations on the part of the manufacturer or vendor. Neither the manufacturer nor the vendor accept liability for any errors or inaccuracies that this document may contain. Nor is liability accepted for damages or losses that arise from the incorrect application of this guide.
Declaration: This device meets the EN 55022 product standard for interference emissions, the EN 50082-1 basic standard for interference, and the EN 60950 low voltage directive standard. If any modification that has not been agreed upon with the manufacturer is made to the device, adherence to these standards can no longer be guaranteed. To ensure electromagnetic compatibility (EMC), please observe the information given in the handbook.
Returning the Device/Battery We accept the return of all our products after they have been used if the condition corresponds to standard proper usage. Returned devices are either slated for further use or dismantled and recycled in an environmentally sound manner. The return is handled through your dealer. Rechargeable and disposable batteries containing heavy metals should not be thrown in with household waste.
54
Important Safety Information Although the notebook is highly robust, it is not indestructible. To prevent damage from occurring, please pay attention to the following: • Avoid exposing the notebook to strong shocks or vibrations. • Keep it away from intense heat (radiators, direct sunlight). • Protect the notebook from electromagnetic interference. This will also prevent data loss. • Don’t expose it to moisture. This is an electrical device! • Be sure to use the correct power supply.
• Note on the System Clock Battery Caution: There is a risk of explosion if batteries are replaced incorrectly. Replace the battery only with a battery recommended by the manufacturer or with a battery of the same type. Dispose of the battery according to the manufacturer’s instructions. • Servicing Do not service the notebook yourself! You could invalidate your warranty rights and expose yourself and the device to the risk of electrical shock.
Wireless LAN (wireless network - abbreviation = WLAN) Your notebook may contain a Wireless LAN module (optional). This module allows you to set up a wireless-based network, and to connect with an existing wireless network. It works according to the IEEE802.11a+b+g standard. WLAN technology allows users to set up wireless connections inside a local area (e.g. in a company or campus building, or in a public building such as an airport).
Additional safety notes for units with wireless LAN A wireless LAN component is integrated into your Notebook. For this reason you must make sure that you comply with the following notes on safety: • Switch off the Notebook when you are in an aircraft or while driving a car. • If you are in a hospital, an operating room or close to an electronic medical system, switch off the wireless components in the Notebook! The radio waves which are transmitted could disrupt the working of the medical equipment.
CE-labelling for units with wireless LAN As delivered, this device complies with the requirements of the Guideline 1999/5/EG of the European Parliament and of the Council dated the 9. March 1999 concerning radio equipment and telecommunications facilities, and the mutual recognition of conformity. This notebook may be used in Belgium, Germany, France, Great Britain, Italy Luxembourg, the Netherlands, Austria, Switzerland, Spain and Poland.
Restrictions France Restricted frequency range: In France, you may only use channels 10 to 11 (2457 MHz or 2462 MHz). It is forbidden to use the unit outside of enclosed areas. Info: www.art-telecom.fr Italy An official authorization is also required to use the unit in internal areas. For more detailed information about the necessary procedure to do this, please contact your provider. It is forbidden to use the unit outside of enclosed areas. Info: www.agcom.
Radio frequencies for units with wireless LAN The following information was correct at January 2002. You can obtain current information from the appropriate authorities in your country (e.g. www.regtp.de). FREQUENCIES Radio network cards and adapters are designed in accordance with IEEE-Standard 802.11b+g for use in the ISM frequency band (Industrial, Scientific, Medical) between 2.4 and 2.4835 GHz.
Legal requirements - exception clauses EXCEPTION CLAUSES FOR UNITS WITH WIRELESS LAN The installation and use of an unit with Wireless LAN may only take place when in accordance with the instructions contained in the user documents. The user documents are included in the material supplied with the product. All alterations or modifications made to this unit which are not expressly authorised by the manufacturer may lead to cancellation of the right of the user to operate the unit.
Shipping Contents Before you begin installing your notebook, make sure that all components are present. If any item listed in the shipping contents is missing from your notebook package, please contact your dealer immediately. • Notebook • Battery • Utility CD • Power adapter • Power cable • User guide • Optical drive • Modem cable Please retain the original packaging in case you need to send the device for repairs or upgrades. Please store the packaging safely.
64
Preparation Before first using the computer, make sure you are familiar with the individual components of your system. Slide the release catch (1) to the right and open the display (2). Fig. 1 (1) Release catch (2) Fold back the display UK Fig.
Inserting the Battery The battery is included in the notebook’s shipping contents. This battery is only partially charged. Note that the charging time for the battery is 3 hours if the computer is switched off, or 4 hours if the computer is switched on. 1 1 3 1 2 2 It is absolutely essential to fully charge the battery for initial operation! Do not unplug the power adapter until the battery is fully charged. 2 Fig. 3 (1) Insert the battery into the battery slot in the direction of the arrow.
Power Supply The notebook is supplied with a power cable and a universal, self-adjusting power adapter. The power adapter can operate with any constant voltage between 100 and 240 volts. To use the power adapter: 1. Connect the power adapter to the DC IN socket located on the side of the notebook. 2. Connect the power cable to the power adapter. 3. Connect the power cable to a power outlet. You can choose to run the notebook via battery or power supply.
Switching the Notebook On You’ve now completed the preparations. Now press the on/off button to switch on the notebook. Tip: If you experience a program or system crash, press the keys: Ctrl + Alt + Del at the same time. In most cases, this will enable you to end only the task that has crashed and restart the notebook (warm start). If this does not work, hold down the on/off button for more than four seconds – this will switch off the notebook.s You can now start up the computer as normal (cold start).
Power Management Your system is compatible with the ACPI power saving system. The basic power management settings can be found under the following in Windows operating systems: . If you have questions, use the Windows Help function. Here you can set the behavior separately for various battery charge levels. Standby: – low energy consumption – The display is dimmed and the hard disk remains unchanged. The power LED flashes.
70
System Overview Left Side 9 Fig. 6 (1) Network port (2) Modem port (3) USB ports (4) Line-in port (5) Microphone socket (mono) (6) Loudspeaker/headphones socket (with SPDIF) (7) IEEE 1394 port (8) PC card slot (9) Infrared transmitter/receiver (IrDA) UK Right Side Fig.
Rear View Fig. 9 All air intake and ventilation openings must be kept free from obstructions at all times. If not, the device is liable to overheat. (1) Kensington Lock anti-theft device (2) Power adapter socket (3) S-Video TV output (4) Connector for external monitor (5) Port replicator connector (6) USB ports Underside All air intake and ventilation openings must be kept free from obstructions at all times. If not, the device is liable to overheat. 2 1 Fig.
Explanation of LED Displays Fig. 11 (1) Drive access (2) Num Lock (3) Caps Lock (4) Scroll Lock (5) Power (6) Battery (7) E-mail (8) Wireless LAN UK Table 1 Symbol Meaning Lights when the hard disk is being accessed. Lights when Num Lock is on. Lights when Caps Lock is on. Lights when Scroll Lock is on. Lights when the notebook is switched on. Flashes in power save mode. Lights when the battery is charging. Flashes when you have new E-mail. Lights when the wireless LAN is activated.
Hot Keys (Shortcut key combinations with special functions) To activate the hot keys, press and hold down the Fn key and then press the desired additional key. To access certain functions, it may be necessary to install the Power4 Gear+ program and the TouchPad software. You can find additional information on this on the next page. Table 2 Keys Meaning Fn + F1 Switches to power saving mode. Fn + F2 Switches the wireless network (WLAN) on/off. Fn + F5 Reduces LCD brightness.
The Quick Buttons (Quick Launch keys) The quick launch buttons are located just above the keyboard. These buttons allow direct access to frequently used functions. If the keys are not assigned to any functions, you can find the driver to activate the function on the Utility CD. To do this, please follow the instructions in the “Installation Instructions” section. UK Fig.
The Keyboard Your notebook’s keyboard has all the functions of a normal AT-compatible keyboard plus some extras: Typewriter These keys correspond to a typewriter’s keys. Function keys In many operating systems (and applications), special functions are available via these keys. You can find more detailed information on this in the relevant handbooks. Special keys These keys (and key combinations) are used for controlling various hardware functions. Fig.
The TouchPad The system automatically sets up the integrated TouchPad. If you are using Microsoft® Windows®, no driver needs to be installed for the basic functions. If you wish to use the advanced functions, you can find the driver to activate the function on the Utility CD. To do this, please follow the instructions in the “Installation Instructions” section.
The CD-ROM/DVD Drive To insert a CD, press the eject button on the front side of the drive. 1 Fig. 15 Fig. 16 Place a CD onto the spindle with the label side facing up and push it gently down onto the spindle. Push the CD tray back in until it locks into place. The CD is now ready to read. Some CDs have an autostart function. This means that installation programs or music CDs automatically run after you place them in the drive. The PC Card Slot The notebook is equipped with a PC card slot.
The Data/Fax Modem The system automatically sets up the integrated analog modem. To use the modem functions, connect the modem socket to an analog telephone socket (not ISDN) using the telephone cable. Proper use: The modem can be connected to all analog sockets in Europe. It is to be used solely for data communication purposes. Do not attempt to connect the modem to an ISDN telephone socket! This would result in serious damage to the device. UK Fig.
80
Installation Instructions Restoring the Drivers Your system is supplied in a preloaded condition. This means that all the data and drivers that the system requires are already on the hard disk. In case you erase and/or format your hard disk drive, the system drivers are stored on the Utility CD supplied with the computer. After reinstalling the operating system (for example, with the Recovery CD), this allows you to restore your notebook to a usable condition.
82
Specifications Processor and Platform • Intel® Core™ Duo Processor • Intel® Core™ Solo Processor • µFC-PGA package • Intel® 945GM & ICH7M RAM • Main memory expandable to 2 GB DDR2 SDRAM (Only allow qualified service personnel to expand the main memory) • Two PC2-5300 SODIMM sockets Display and Video • 15 inch XGA TFT display Supported resolution 1024 × 768 with up to 16.
Communications • Fast Ethernet function for 10/100 Mbps, built in • Intel® Centrino® 802.11a+b+g wireless network mini PCI module (optional) • Modem • Infrared interface Input Devices • 86/87/88-key Microsoft® Windows® keyboard • Ergonomically positioned TouchPad • Quick launch keys Ports • One 15-pin VGA port • One TV-out port • One stereo output socket (with SPDIF) • One microphone input socket (mono) • One Line In port • Four USB ports (v2.
Operating System • O/S Microsoft® Windows® XP Other Data • Dimensions 293 (D) × 336 (W) × 44 (H) mm • Weight 2.
86
Fault Diagnosis and Troubleshooting If a problem occurs while working with your notebook, first of all try using the following information to solve the problem. If the problem persists, switch off the system for several minutes and then restart it. You will lose all unsaved data, but the system may work properly again. Subsequently contact your dealer or customer support agent. Despite pressing the on/off button, the notebook remains switched off.
Possible cause of the problem: • In the System Settings, a screen type other than the existing one has been set. Troubleshooting: • Press the Fn + F8 key combination. • If an external monitor is connected, connect this to a power source and switch it on. Also check the brightness and contrast settings. The system stops working. Possible cause of the problem: • An energy saving function has been activated. Note: • The screen switches itself off.
Index A Accuracy ................................................ 77 ACPI power saving system .................... 69 Arrow keys ..............................................76 B Battery ..................... 53, 56, 63, 66, 73, 87 Battery or power supply ........................ 67 C Charging times ...................................... 66 Cleaning ................................................. 56 Cold start ............................................... 68 Color depth ...........................
R Release .................................................. 71 Release catch ........................................ 65 Resolution.................................. 68, 81, 83 S S-Video .................................................. 72 Shipping contents .................................. 63 Shocks/Vibrations .................................. 55 Standby.................................................. 69 Status LEDs ........................................... 65 Sunlight...........................
