User`s manual

8 9MAXDATA PLATINUM 100 IBoard Features
8 9MAXDATA PLATINUM 100 IBoard Features
The NIC LEDs at the right and left of each NIC provide the following information:
Table 3. NIC LEDs
NIC LED Color LED State Description
Intel
®
82551QM
(10/100Mbit)
Left LED Off 10 Mbps connection (if right LED is on)
Solid Green 100 Mbps connection
Right LED On Network connection in place
Blinking Green Transmit/receive activity
Marvell*
88E8050
(Gigabit)
Left LED Off
No network connection
Solid Amber
Network connection in place
Blinking Amber Transmit/receive activity
Right LED Off 10 Mbps connection (if left LED is on or blinking)
Solid Amber 100 Mbps connection
Solid Green 1000 Mbps connection
Processor
The board supports a single Intel
®
Pentium
®
4 Processor in the LGA775 package.
CAUTION
Failure to use an ATX12V power supply or not connecting the 12 V (2 × 2) power connector to the
mainboard may result in damage to the board and/or power supply.
Main Memory
The mainboard supports dual or single channel memory configurations defined in Table 4.
 NOTE
To be fully compliant with all applicable memory specifications, the board should be populated with
DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do
not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will
attempt to configure the memory controller for normal operation.
Table 4. Memory Configurations
Memory
Speed
Processor FSB frequency
(MHz)
Memory Speed
Outcome
(MHz)
DDR2 533 Intel
®
Pentium
®
4
Processor
800 533
533 533
DDR2 400
Intel
®
Pentium
®
4
Processor
800 400
533 333
• Four 240-pin Double Data Rate 2 (DDR2) SDRAM Dual Inline Memory Module (DIMMs)
connectors with gold-plated contacts.
• Support for:
- Unbuffered, non-registered single or double-sided DIMMs
- Serial Presence Detect (SPD) memory only
- 1.8 V memory
- Memory configuration listed below:
- Up to 2.0 GB utilizing 256 MB technology
- Up to 4.0 GB utilizing 512 MB or 1 GB technology