User`s manual

12 13MAXDATA PLATINUM 100 IInstalling and Replacing Board Components

4. Remove the protective socket cover from the load plate. Do not discard the protective socket

cover. Always replace the socket cover if the processor is removed from the socket (see

Figure 6, E).

5. Remove the processor from the protective processor cover. Hold the processor only at the

edges, being careful not to touch the bottom of the processor. Do not discard the protective

processor cover. Always replace the processor cover if the processor is removed from the

socket (see Figure 7).

Figure 7. Remove the Processor from the Protective Processor Cover and Do Not Touch

Figure 6. Remove the Protective Socket Cover

�