User`s manual

68 69MAXDATA PLATINUM 7200 IR M6User Serviceable Platform Components
68 69MAXDATA PLATINUM 7200 IR M6User Serviceable Platform Components
CAUTION
Do not attempt to hot remove or hot add a Memory Board in a non-redundant configuration. If your
server is not configured in the BIOS setup utility for Maximum Compatibility, Memory RAID, or Memory
Mirroring, you must power down your server before removing or installing any Memory Board or
memory DIMMs. For instructions, see “Cold Removal of Memory Board” and “Cold Insertion of a
Memory Board”.
Removing Memory Board Air Baffle
Either a Memory Board or a Memory Board air baffle must be installed in each Memory Board slot.
1. Observe the safety precautions, warnings, and cautions described in “Safety Information”.
2. Remove the top cover. For instructions, see “Removing the Top Cover”.
3. Insert your fingers into the two holes on the top of the Memory Board air baffle.
4. Push the tab between the two holes in the direction of the arrow.
5. Lift the Memory Board air baffle from the server.
Installing Memory Board Air Baffle
1. Observe the safety precautions, warnings, and cautions described in “Safety Information”.
2. Remove the top cover. For instructions, see “Removing the Top Cover”.
3. Insert the Memory Board air baffle into the Memory Board slot with the arrow on the tab
pointing to the right. The Memory Board air baffle will lock into the Memory Board slot.